Here is a 2013 / 2014 Vulcan Gasifier M-2 for sale for just $2500 bucks. If interested contact me and Ill get you in touch with the seller. This will run a range of engines from 400 cc to 700 cc V Twins.
Up for sale is a 2015 Vulcan Gasifier. This is the the M-1 Utility Gasifier that we produced from 2014 on up to 2017. This is a direct raw fuel chip or small chunk machine. It runs on 1X1 chips with a thickness range of 3/8 to 1/2 inch thick chips. It could also run on small chunks of 1" to 1.5 inch cubes. Moisture content should not exceed 15%.
This machine was sold in 2015 and never used. The unit has sat since it shipped but the user has attempted to run it at least once that we know of to test and simply flare the machine. The user simply has not had time to mess with the unit and has decided to sell it.
He is asking $6500.00. If this unit were produced today it would cost well over $12,000.00 USD and it is fully automated featuring hopper and grate agitators and electron air fuel mixture controls. No gasifier at this scale will self sustain without automation, it is a must have if you plan to ever walk away from the machine while it is in operation.
You can contact me directly at mryder@thrivenrg.net and Ill get you connected with the owner.
Up for sale is the VersiFire original prototype base unit. This was an early design we started to build and then changed direction. So we will not be pursuing this first design concept so it is now offered for sale for the DIYer. This features a gas cooler, settling tower (that can be used as a media filter), Grate actuator system with grate, revision for the Amteck blower motors and reduction housing (not shown) all integrated into the base. There is also a clean out door that is not installed but will install if sold.
Please note the blower shown does not come with the unit, it is needed for the unit that will replace this one.
All that is missing is a gasifier that could be installed onto the reduction housing and to build a manifold to connect the cooler to the settling tank / Filter.
Asking $500.00 plus shipping or local pick up can be arranged.
Here is a 2013 / 2014 Vulcan Gasifier M-2 for sale for just $2500 bucks. If interested contact me and Ill get you in touch with the seller. This will run a range of engines from 400 cc to 700 cc V Twins.
Up for sale is a 2015 Vulcan Gasifier. This is the the M-1 Utility Gasifier that we produced from 2014 on up to 2017. This is a direct raw fuel chip or small chunk machine. It runs on 1X1 chips with a thickness range of 3/8 to 1/2 inch thick chips. It could also run on small chunks of 1" to 1.5 inch cubes. Moisture content should not exceed 15%.
This machine was sold in 2015 and never used. The unit has sat since it shipped but the user has attempted to run it at least once that we know of to test and simply flare the machine. The user simply has not had time to mess with the unit and has decided to sell it.
He is asking $6500.00. If this unit were produced today it would cost well over $12,000.00 USD and it is fully automated featuring hopper and grate agitators and electron air fuel mixture controls. No gasifier at this scale will self sustain without automation, it is a must have if you plan to ever walk away from the machine while it is in operation.
You can contact me directly at mryder@thrivenrg.net and Ill get you connected with the owner.
Up for sale is the VersiFire original prototype base unit. This was an early design we started to build and then changed direction. So we will not be pursuing this first design concept so it is now offered for sale for the DIYer. This features a gas cooler, settling tower (that can be used as a media filter), Grate actuator system with grate, revision for the Amteck blower motors and reduction housing (not shown) all integrated into the base. There is also a clean out door that is not installed but will install if sold.
Please note the blower shown does not come with the unit, it is needed for the unit that will replace this one.
All that is missing is a gasifier that could be installed onto the reduction housing and to build a manifold to connect the cooler to the settling tank / Filter.
Asking $500.00 plus shipping or local pick up can be arranged.