Hi Kevin, no need for a flow meter. The engine simply sucks the gas in and on the RTR machines we offer there is an air fuel mixer. This mixes in the air with the fuel , this is manually adjusted and something you will learn by doing. Its not dificult to do at all.
However on our more advanced automated machines those machines could do this electronically. This system uses an O2 sensor system that feeds data to our controller. Our controller takes this information and compensated air fuel ratio based on rich or lean readings from the sensor. Charcoal is much more stable than raw woodgas systems so we do not offer it currently on these simpler low cost machines. I do plan to bring back the automation systems, however that will come at an expense. The automation systems I build are well beyond just controlling air fuel mixture. This automation fully controls and runs ever aspect of the machine. This incudes lighting and flaring the machine, cranking over the engine with air fuel premixing. With this system you are not actually running the machine. You are basically telling my controls what you want it to do by pressing modes on a touch screen interface. The controls then carry out the task.
Hi Kevin, no need for a flow meter. The engine simply sucks the gas in and on the RTR machines we offer there is an air fuel mixer. This mixes in the air with the fuel , this is manually adjusted and something you will learn by doing. Its not dificult to do at all.
However on our more advanced automated machines those machines could do this electronically. This system uses an O2 sensor system that feeds data to our controller. Our controller takes this information and compensated air fuel ratio based on rich or lean readings from the sensor. Charcoal is much more stable than raw woodgas systems so we do not offer it currently on these simpler low cost machines. I do plan to bring back the automation systems, however that will come at an expense. The automation systems I build are well beyond just controlling air fuel mixture. This automation fully controls and runs ever aspect of the machine. This incudes lighting and flaring the machine, cranking over the engine with air fuel premixing. With this system you are not actually running the machine. You are basically telling my controls what you want it to do by pressing modes on a touch screen interface. The controls then carry out the task.