I’m interested if there is more than one carburetor adapter for the M-2 Mule RTR ? The adapter that came with the M-2 Mule is a 3 inch diameter x 3/8 inch pvc plastic with a 1 1/4 Inch standard pipe thread hole.
I know it will fit my generator,but I would like to do my first test run on a 5hp Briggs Motor.The Carburetor adapter is too large to fit.Any suggestions would be appreciate.
It looks like you created a new thread? When you want to add something all you have to do is select the "reply" or "comment" button on the upper left on your existing thread.
Yes there are different ways. See this thread here. This should give you some ideas to get some simple parts locally that you might find at Home Depot, Lowes, Menards etc. or you can just order parts from the links provided here. We supply you with one adapter, but I created this thread so you can all DIY your adapters so you can adapt additional applications.
https://www.thriveoffgrid.net/forum/general-discussions/adapting-engines
The adapter I sent you has been revised since. I have added counter bores to the mounting holes but I had to order this counter bore. If you have issues with your bolts not long enough let me know and I'll get you the revised version sent.
Just to clarify the fittings are 1 inch NPT.